With fire season on the way, plenty of landholders, contractors and councils are flat out on firebreaks. Doing it the old way, with slashers, chainsaws and a burn pile, takes days and leaves a mess. An excavator mulcher does it in one pass: it cuts, mulches and spreads the material, with nothing left to cart away or burn.
We've spent 15 years behind a mulcher, so here's what we've learned about cutting firebreaks quickly and properly.
Why use an excavator mulcher for firebreaks?
Reach. An excavator works from the track and reaches over fences, down batters and into gullies where a tractor or slasher can't go.
One pass. Scrub, regrowth and small timber are mulched where they stand. No windrows, no stacking, no burn-off.
Less soil disturbance. Mulching leaves the root mat and topsoil in place, unlike blading with a dozer, so you get less erosion on slopes.
Tidy finish. The mulched material lies flat and breaks down over time.
Forestry mulcher or flail?
This is the first thing to sort out, and it depends on what you're clearing.
Forestry (fixed tooth) mulchers are for establishing a break through regrowth, saplings, scrub and timber. Fixed carbide hammers take hits from rocks and stumps, and handle timber up to 200–250 mm depending on the model.
Flail mulchers are for grass, blackberries, light scrub and keeping existing breaks clean year after year. They leave a smoother, lawn-like finish.
A lot of our customers use a forestry mulcher to cut the break the first time, then a flail to maintain it each season.
What size mulcher suits your excavator?
1.5–5 t excavators: DHL flail mulcher
2–6 t excavators: TFK forestry mulcher
5–10 t excavators: EXH flail mower
6–9 t excavators: TFXL forestry mulcher
8–13 t excavators: TFL forestry mulcher
Weight is only half of it. Your machine's hydraulic flow and pressure matter just as much, and some models need a case drain. See the full range on our excavator mulchers page, or send us your make and model and we'll tell you what fits.
Tips for cutting a firebreak with a mulcher
Walk the line first. Look for rocks, star pickets, old fencing wire and stumps. Hitting them is the quickest way to wreck hammers.
Check what you're allowed to clear. Rules on removing native vegetation vary, and some fire protection works have exemptions. Check with your council or the CFA before you start.
Pull out the big stuff first. Use a stick rake to drag out logs and heavy timber, then mulch what's left. Your mulcher will thank you.
Work from the cleared side. Keep the machine on stable, cleared ground and mulch ahead of you.
Watch the weather. Mulcher hammers can throw sparks off rocks. Avoid hot, windy days, and check CFA rules for using machinery during the fire danger period and on Total Fire Ban days.
Keep spares on hand. Hammers, teeth and belts wear. We keep spare parts on the shelf in Yarra Junction so you're not stuck mid-job.
Running a skid steer instead?
Skid steers are great for firebreaks on flatter ground. The SSK-RT suits low flow machines from 40–80 hp, and the SSQ is built for high flow skid steers from 70–120 hp.
Not sure what you need?
Tell us your machine and what you're clearing, and we'll give you a straight answer on what works. Call Dan on 0401 463 842 or send us an enquiry. All our mulchers are in stock in the Yarra Valley and delivered Australia-wide.